Laboratory & Healthcare Identification
LH-14
Medication Syringe Labels
This product is intended for hospital IV preparation, operating theatre and anaesthesia, emergency care, clinical pharmacy, nursing and medication-safety teams.
Request pricing for LH-14
Product overview
What this product covers
This product is intended for hospital IV preparation, operating theatre and anaesthesia, emergency care, clinical pharmacy, nursing and medication-safety teams. It is applied immediately after a medicine is drawn up or compounded and carries the organisation-approved medicine name, concentration or dose, preparation date and time, beyond-use or expiry, preparer and optional patient or barcode data. It must fit a small curved barrel without hiding critical graduations or interfering with the plunger and handling. Confirm who prints at which station, syringe size, usable area, mandatory fields, colour rule and scanning before conformable stock, low-lift adhesive and flag or wrap geometry. This page presents one standard model, LH-14, in Printable paper syringe-label stock. Dimensions, processes and acceptance notes on this page refer to this representative construction.
Applications
- Syringes, medication preparation and bedside identification
Buyers and teams
- hospital and retail pharmacies, dispensing centres, clinical nursing and medication-safety teams
Materials
- Printable paper syringe-label stock
Marking
- Custom to artwork
Installation
- Designed for the mounting object
Specifications
| Field | Documented value |
|---|---|
| Syringe & label size | Syringe outside diameter, usable length; label width × height, flag or wrap size |
| Medication fields | Medicine, concentration/dose, diluent, preparation time, discard time, preparer and patient fields |
| Colour & readability | Facility-approved colour rule, text size, contrast and handwritten/printed method |
| Adhesion & duration | Syringe material, chilled/room temperature, wet handling, short/delayed use and removal need |
| Print & supply | Printer, core, roll diameter, pitch, unwind, preprint or point-of-use print |
Recommended project inputs
- Medication Syringe Labels; syringe brand and size sample, approved fields and colour rule, print station and printer, label size, barcode, cold or medication exposure, quantity.
- State the identified object, material/surface, available space, orientation, holes/ties/adhesive/matched tool and provide a site photo where possible.
- Provide length, width/diameter, thickness, corners/edges, holes/slots, fit tolerances and any keep-clear or no-adhesive zones.
- Supply final text, units, graphics, colour, language, serial/barcode/RFID rule, human-readable data and one approved revision; numbers shown in sample images are never treated as production data.
- State temperature and dwell, indoor/outdoor use, UV, water, oil, cleaner/chemical, abrasion, vibration, read conditions or other real exposure together with test method and pass/fail criterion.
- Provide prototype and production quantity, start/end and permitted-gap rules, grouping, packing sequence, batch documents and target delivery.
- Where regulation, certification, permit, ethics, brand authorisation or customer specification applies, provide the applicable revision and owner-approved file; a product name or image cannot replace it.
Continue with this product
Discuss Medication Syringe Labels
Include product code LH-14 with the project inputs that apply.